Bulkhead between Driver & Engine now fitted.
Tuesday 17 September 2013
Drivers Seat & Engine Bulkhead
The Drivers Seat as been refurbished and is looking good.
Bulkhead between Driver & Engine now fitted.
Bulkhead between Driver & Engine now fitted.
Wednesday 11 September 2013
Cooling Fan - Bearings & Blades Replaced
The Cooling Fan was extremely noisy... as can be deduced from my last Video Clip (previous post)
Fan was removed (a bit of a pain) and stripped down.... bearings were knackered !
New bearings ordered.... and fitted. Also, as luck would have it, I managed to get hold of another fan unit which had no damage to the fan blades so one good unit was made out of the two.
I also had another Alternator... so decided to replace the existing one, which I now know works fine, so I now have a good spare.
vehicle has been started and sound lovely.... video to follow.
Fan was removed (a bit of a pain) and stripped down.... bearings were knackered !
New bearings ordered.... and fitted. Also, as luck would have it, I managed to get hold of another fan unit which had no damage to the fan blades so one good unit was made out of the two.
I also had another Alternator... so decided to replace the existing one, which I now know works fine, so I now have a good spare.
vehicle has been started and sound lovely.... video to follow.
 |
| Worn out bearing |
 |
| Component parts of original fan |
 |
| New Bearings fitted to main shaft |
 |
| Assembled "New" unit |
 |
| Fan Blades - No damage |
Subscribe to:
Posts (Atom)